服務熱線
135-0983-1315
項次 No | 項目 Item | 內容 Content | 時機 Period | 備注 Remark |
01 | 送風馬達轉向 Rotating direction | 轉向須與箭頭指示相同 The direction must be the same with the arrow | 機臺安裝后 After installation | |
02 | 機臺箱內 Interior space | 保持箱內清潔 Keep cleaning | 隨機 Random | |
03 | 機臺頂蓋通風孔 The vent on the top of oven | 保持通風孔通暢 Keep fluent | 每月 Each month | |
04 | 電氣配電盤 Control cabinet | 保持配電盤清潔及固定螺絲牢固 Keep clean and all screws are fixed | 每月 Each month | |
05 | 接地線 Grounding cable | 保持接地狀態 Keep with ground | 隨機 Random | |
06 | 超溫防止器 Over Temp. protector | 確定溫度設定正確 Make sure the setting Temp. is correct. | 隨機 Random | |
07 | 溫度感應線 Thermo couple | 確定感應線未脫落 Make sure the couple is fixed | 隨機 Random | |
08 | 進排風管 Exhausting pipe | 保持風管通暢 Keep fluent. | 一或三個月 1 or 3 months | 視客戶環境而定 Depends on the environment |
09 | 送風風輪 The fan | 保持風輪清潔 Keep cleaning | 半年或一年 Half or one year |
視客戶環境而定 Depends on the environment |
10 | 機臺各部螺絲 The screws in whole oven | 保持螺絲牢固 Keep them is locked
| 隨機 Random | |
11 | 電磁接觸器 Electronic contactor | 更換 Replace it | 每年 Each year |
＊ 若溫控器為RELAY控制時，請定期檢查，以免因故障造成溫控器功能失效。
＊ If the Temp. controller is controlled by RELAY. Please check it often to avoid Temp. controller malfunction.
